RANPRO
341 Huskies Light Duty Glove
341 Huskies Light Duty Glove
- Brand
- RANPRO
- Category
- Safety Gloves
- SKU
- V5241220 / V5240820
- Model number
- 341
Shop this equipment in
Impossible de charger la disponibilité du service de retrait
The 341 HUSKIES LIGHT DUTY GLOVE is identified as a light duty glove with a one-piece back and a wing thumb. The supplied size designation is One Size. These are the stated product details for this listing; purchasers should confirm the configuration and task requirements before ordering. Use the listed model code and size designation when reviewing the item for an order, and verify that the stated details meet the requirements of the intended work.
- Model: 341
- Construction detail: One-piece back
- Thumb style: Wing thumb
- Size designation: One Size
If further details are required for purchasing approval, confirm them before ordering rather than assuming specifications beyond those listed here.
Glove-selection reference chart
General selection guidance—not this product’s cut rating. Not every glove is cut-rated.
Read the full cut-resistant glove guide | Open full-size chart
Read chart as text
Choose from the task and hazard assessment—not a cut rating or job title alone.
| Selection factor | What to check |
|---|---|
| Cut exposure and rating | Compare the specific glove's manufacturer-stated cut data. ANSI/ISEA A1–A9 indicates increasing resistance in a standardized blade-cut test—not a universal job recommendation. |
| Sharp edges or heavy materials | Assess edge condition, force, frequency and movement. Check separate abrasion, puncture or impact performance where required. |
| Grip and dexterity | Trial the actual surface, tools and controls. Compare coating, grip, flexibility and tactile sensitivity. |
| Liquids or chemicals | Do not assume a cut-resistant knit or coating protects from chemicals. Check the SDS and manufacturer data for the chemical, concentration and contact duration. |
| Heat, cold, welding or electrical work | Verify the separate thermal or electrical protection required. A cut rating is not electrical protection. |
| Rotating or moving machinery | Review equipment instructions and the site procedure before introducing gloves near moving parts. A high cut rating does not resolve entanglement risk. |
| Fit, condition and care | Check size, cuff coverage and sleeve compatibility. Inspect for damage, contamination and loss of grip; remove damaged gloves from service. |
Cut-resistant does not mean cut-proof
Higher cut resistance does not establish protection from puncture, chemicals, heat, electrical hazards or moving machinery.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
