PIONEER
Pioneer 542 Welder's Cowgrain Glove (12 Pack)
Pioneer 542 Welder's Cowgrain Glove (12 Pack)
- Brand
- PIONEER
- Category
- Safety Gloves
- SKU
- V5050100
- Model number
- V5050100
Shop this equipment in
Impossible de charger la disponibilité du service de retrait
The 542 WELDER'S COWGRAIN GLOVE (12 PACK) is a welder's glove with a beige cowgrain palm and a gold cowsplit back. The product title identifies a 12 PACK, while the supplied ordering information states “By dozen or 6 dz/pkg.” Review both the title quantity and the package information when preparing an order. The listed details describe the palm, back and ordering quantities; they do not specify further product configuration or task requirements.
- Beige cowgrain palm
- Gold cowsplit back
- By dozen or 6 dz/pkg
Before ordering, the purchaser should confirm the required configuration, package quantity and task requirements to ensure the order matches the intended work.
Glove-selection reference chart
General selection guidance—not this product’s cut rating. Not every glove is cut-rated.
Read the full cut-resistant glove guide | Open full-size chart
Read chart as text
Choose from the task and hazard assessment—not a cut rating or job title alone.
| Selection factor | What to check |
|---|---|
| Cut exposure and rating | Compare the specific glove's manufacturer-stated cut data. ANSI/ISEA A1–A9 indicates increasing resistance in a standardized blade-cut test—not a universal job recommendation. |
| Sharp edges or heavy materials | Assess edge condition, force, frequency and movement. Check separate abrasion, puncture or impact performance where required. |
| Grip and dexterity | Trial the actual surface, tools and controls. Compare coating, grip, flexibility and tactile sensitivity. |
| Liquids or chemicals | Do not assume a cut-resistant knit or coating protects from chemicals. Check the SDS and manufacturer data for the chemical, concentration and contact duration. |
| Heat, cold, welding or electrical work | Verify the separate thermal or electrical protection required. A cut rating is not electrical protection. |
| Rotating or moving machinery | Review equipment instructions and the site procedure before introducing gloves near moving parts. A high cut rating does not resolve entanglement risk. |
| Fit, condition and care | Check size, cuff coverage and sleeve compatibility. Inspect for damage, contamination and loss of grip; remove damaged gloves from service. |
Cut-resistant does not mean cut-proof
Higher cut resistance does not establish protection from puncture, chemicals, heat, electrical hazards or moving machinery.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
