PIONEER
Pioneer 834 Fitter's Cowsplit Glove (12 Pack)
Pioneer 834 Fitter's Cowsplit Glove (12 Pack)
- Brand
- PIONEER
- Category
- Safety Gloves
- SKU
- V5022300
- Model number
- V5022300
Shop this equipment in
Impossible de charger la disponibilité du service de retrait
The 834 Fitter's Cowsplit Glove (12 PACK) is listed with a grey cowsplit patch palm, inside elastic and a pasted cuff. Ordering details identify the available quantities and the required sales multiple.
- Grey cowsplit patch palm
- Inside elastic, pasted cuff
- By dozen or 10 dz/pkg
- Sold in multiples of 12
Before ordering, the purchaser should confirm the glove configuration and task requirements. Check the stated packaging information against the quantity needed for the order, including the 12 PACK title designation and the 10 dz/pkg listing. Confirm the intended ordering quantity before purchase, as the supplied sales information specifies multiples of 12.
Glove-selection reference chart
General selection guidance—not this product’s cut rating. Not every glove is cut-rated.
Read the full cut-resistant glove guide | Open full-size chart
Read chart as text
Choose from the task and hazard assessment—not a cut rating or job title alone.
| Selection factor | What to check |
|---|---|
| Cut exposure and rating | Compare the specific glove's manufacturer-stated cut data. ANSI/ISEA A1–A9 indicates increasing resistance in a standardized blade-cut test—not a universal job recommendation. |
| Sharp edges or heavy materials | Assess edge condition, force, frequency and movement. Check separate abrasion, puncture or impact performance where required. |
| Grip and dexterity | Trial the actual surface, tools and controls. Compare coating, grip, flexibility and tactile sensitivity. |
| Liquids or chemicals | Do not assume a cut-resistant knit or coating protects from chemicals. Check the SDS and manufacturer data for the chemical, concentration and contact duration. |
| Heat, cold, welding or electrical work | Verify the separate thermal or electrical protection required. A cut rating is not electrical protection. |
| Rotating or moving machinery | Review equipment instructions and the site procedure before introducing gloves near moving parts. A high cut rating does not resolve entanglement risk. |
| Fit, condition and care | Check size, cuff coverage and sleeve compatibility. Inspect for damage, contamination and loss of grip; remove damaged gloves from service. |
Cut-resistant does not mean cut-proof
Higher cut resistance does not establish protection from puncture, chemicals, heat, electrical hazards or moving machinery.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
