HIIGARD VERTICAL ROPE LIFELINE — 25, 50 OR 100 FT — HG-1540CLL

Photographs show the 50 ft version, HG-1540CLL-50'. Select the required length above; the photograph does not show the 25 ft or 100 ft version.

Vertical rope lifeline

The HIIGARD HG-1540CLL rope lifeline is available in 25, 50, and 100 ft lengths. It has a standard snap hook, a 5/8 in (16 mm) diameter, and three-strand polyester/polypropylene blend rope.

Length and model options

• 25 ft (7.62 m): HG-1540CLL-25'. Product identification: CSA Z259-2.5.
• 50 ft (15 m): HG-1540CLL-50'. Product identification: CSA Z259-2.5.
• 100 ft (30 m): HG-1540CLL-100'. HIIGARD catalogue identification: CSA Z259.2.5-17.

Before use

Confirm that the selected SKU and length match the job requirements. Review the manufacturer's instructions and use only compatible lifelines, connectors, anchorage, and fall-protection equipment in an approved system configuration. Follow applicable site fall-protection procedures.

Before each use, inspect the rope, stitching, snap hook, gate, labels, connection points, and hardware for cuts, abrasion, excessive wear, contamination, deformation, corrosion, damaged stitching, or other damage. Confirm that the hook closes and locks correctly. Remove the lifeline from service if inspection reveals damage, any condition that could affect safe use, or if it has been involved in a fall. Follow the manufacturer's instructions.