Ranpro
Ranpro 777L Classic Heavy Duty Mitts
Ranpro 777L Classic Heavy Duty Mitts
- Brand
- RANPRO
- Category
- Work Mitts
- SKU
- SUW-V5241440-O/S
- Model number
- SUW-V5241440-O/S
Shop this equipment in
Impossible de charger la disponibilité du service de retrait
Ranpro 777L Classic Heavy Duty Mitts feature a one-finger design with lining at the backs. Heat-resistant side-split material forms the palm and back, while the T-80 stitching incorporates 4-ply Kevlar® to provide strength and durability. These construction details define the Ranpro Classic Heavy Duty mitt, identified by manufacturer part number 777L and product code SUW-V5241440-O/S.
- One-finger mitt configuration
- Back sections include lining
- Heat-resistant side-split construction at the palm and back
- T-80 stitching with 4-ply Kevlar®
- Manufacturer part number: 777L
- Product code: SUW-V5241440-O/S
Glove-selection reference chart
General selection guidance—not this product’s cut rating. Not every glove is cut-rated.
Read the full cut-resistant glove guide | Open full-size chart
Read chart as text
Choose from the task and hazard assessment—not a cut rating or job title alone.
| Selection factor | What to check |
|---|---|
| Cut exposure and rating | Compare the specific glove's manufacturer-stated cut data. ANSI/ISEA A1–A9 indicates increasing resistance in a standardized blade-cut test—not a universal job recommendation. |
| Sharp edges or heavy materials | Assess edge condition, force, frequency and movement. Check separate abrasion, puncture or impact performance where required. |
| Grip and dexterity | Trial the actual surface, tools and controls. Compare coating, grip, flexibility and tactile sensitivity. |
| Liquids or chemicals | Do not assume a cut-resistant knit or coating protects from chemicals. Check the SDS and manufacturer data for the chemical, concentration and contact duration. |
| Heat, cold, welding or electrical work | Verify the separate thermal or electrical protection required. A cut rating is not electrical protection. |
| Rotating or moving machinery | Review equipment instructions and the site procedure before introducing gloves near moving parts. A high cut rating does not resolve entanglement risk. |
| Fit, condition and care | Check size, cuff coverage and sleeve compatibility. Inspect for damage, contamination and loss of grip; remove damaged gloves from service. |
Cut-resistant does not mean cut-proof
Higher cut resistance does not establish protection from puncture, chemicals, heat, electrical hazards or moving machinery.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
General glove-selection reference. Displaying this chart does not mean this product is cut-rated or suitable for every listed hazard. Confirm its specific performance data, manufacturer limits and site requirements.
